Container Desiccant Hanging 1x125 g (1 Box 72 pcs)
Container Desiccant Hanging 1x125 g – Single Unit
A single hanging container desiccant for small consignments and palletised cargo. It targets the section of the container where your goods sit, preventing the condensation that leads to mould and corrosion in transit.
Where should the pack be hung?
Placement matters as much as quantity. Moisture condenses on the container ceiling and drips down, so the pack should hang as high as possible, close to the roof. It should also sit away from the doors: the door end sees the sharpest temperature swings during a voyage and is the least representative point in the box. The hook attaches to the lashing rings or securing hooks on the container wall. If rope is needed, make sure the pack cannot swing against the cargo.
Key features
- Single 125 g pack: protection at part-load and pallet scale.
- Hanging hook: attaches directly to a lashing ring.
- CaCl₂ gel technology: moisture stays as gel, nothing drips.
- Leak-proof pouch: safe through vibration and rough seas.
- Mounts high: sits close to where condensation forms.
- Up to 60 days: depending on transit duration.
Specifications
| Product | Container Desiccant, Hanging, Single |
|---|---|
| Quantity | 1 unit x 125 g |
| Active ingredient | Calcium chloride (CaCl₂) based compound |
| Duration | Up to 60 days depending on transit time |
| Recommended for | Part container loads, pallet shipments, truck trailers |
| Packaging | Leak-proof pouch with hanging hook |
| Box contents | 72 single packs (9 kg total) |
Hanging the pack
- Open the pack after loading is finished.
- Choose the rear of the container, away from the doors.
- Clip the hook onto a lashing ring on the wall.
- Check that the pack does not rub against or get trapped by the cargo.
- Confirm placement before the doors are closed.
Box contents: 72 single packs
The product is sold by the box, and one box holds 72 single hanging packs — 9 kilograms of absorbent in total. The single pack is the most flexible unit in this range: used on its own for part loads, or four and more together for a full container. Shippers whose dose changes from one consignment to the next often stock singles rather than ready-made sets, so each route can be given exactly the number it needs.
Frequently asked questions
Is one pack enough for a container?
Not for a full load. A single pack is intended for part loads or a few pallets.
Does it work in a truck trailer?
Yes. It suits long road freight where condensation forms inside the trailer.
Hang before or after loading?
After. The pack starts working the moment it is unwrapped, so hang it just before the doors close.
Are packs sold individually?
The selling unit is the box, which holds 72 single packs. You then use as many as the consignment calls for.
Product Filters | ||
|---|---|---|
| Supplier Product Code | : | 125111125 |
| Brand | : | Absormix |
| : | Container Desiccants | |
