Industrial Moisture Absorber Pack (K) 1x50 g

Industrial Moisture Absorber Pack (K) 1x50 g – Square Sachet

The (K) square 50 g industrial moisture absorber is sealed on all four sides, giving a flat pouch. Unlike the back-seam type it has a fixed thickness and an even face, which matters wherever you need to know in advance exactly how the pack will sit.

Where the square format is preferred

Because it is sealed on four sides, a square pouch lies flat and its dimensions are predictable. Those two properties count in narrow, regular gaps: the space under a shelf in an electrical panel, the side pocket of a control box, the few millimetres between a product and the lid above it. A pillow-shaped pouch either will not fit those gaps or, once forced in, is compressed and loses air contact. The square format also stacks, so where several packs go into the same box the layout stays orderly.

Key features

• Square pouch: four-side sealed, flat and dimensionally stable.
• Single 50 g pack: panel, cabinet and box scale.
• Suits narrow gaps: predictable thickness.
• Stackable: multiple packs sit neatly together.
• CaCl₂ gel technology: absorbed moisture gels and does not drip.
• Leak-proof: safe for use in technical enclosures.

Specifications

Use in a narrow gap

1. Remove the pack from its protective wrapper.
2. Position it so it lies flat against a surface.
3. In a panel, use the lower section and keep clear of live parts.
4. Do not block the ventilation louvre or fan airflow.
5. Check and replace it at each maintenance interval.

Frequently asked questions

How does it differ from the back-seam type?
The contents are identical. The square format is flat with a fixed thickness and suits narrow gaps; the back-seam format is flexible and conforms to irregular spaces.

Is there an adhesive version?
Yes. Because adhesive tape needs a flat face, the taped version is produced in this square format.

Can it be replaced with the panel energised?
No. Replacement should be carried out after isolation, by a qualified person.