Moisture Absorber Pack Anchor 1x500 g

Anchor Moisture Absorber Pack 1x500 g – High Capacity

The 500 g Anchor moisture absorber is the high capacity option for boats, caravans and holiday homes left closed for long periods. It aims to keep a laid-up cabin dry through an entire off-season with a single pack.

Why winter lay-up needs high capacity

Once a boat or holiday home is closed for winter, it goes unventilated for months. The moisture that accumulates in that time returns as mould on cushions, corrosion on metal fittings and swelling in timber. A 125 g pack saturates within a few weeks and then stops working, while a 500 g pack carries enough capacity for the bulk of a season.

Key features

• Single 500 g pack: capacity for extended closed periods.
• Anchor print design: keeps the nautical theme.
• CaCl₂ gel technology: holds a high moisture load as gel.
• Leak-proof pouch: safe even when fully saturated.
• Seasonal use: no frequent checking required.
• Up to three times its own weight: around 1.5 kg of moisture.

Specifications

Before closing up for winter

1. Ventilate the cabin thoroughly and remove any damp textiles.
2. Unwrap the pack.
3. Place it centrally, ideally raised off the floor.
4. Hanging it from a grab handle is the most practical option.
5. Check and replace the pack when the season opens.

Frequently asked questions

Will it last all winter?
In a temperate climate it largely will. In very humid regions a second pack is safer.

What if there is more than one cabin?
Each closed space needs its own pack; closed doors block moisture transfer.

Can 125 g packs replace it?
Four 125 g packs give comparable capacity, but a single 500 g pack lasts longer in one location.