Moisture Absorber Pack Anchor 2x125 g

Anchor Moisture Absorber Pack 2x125 g – Twin Set

The anchor printed Anchor moisture absorber twin set suits both a boat cabin and a home cupboard thanks to its nautical design. Two packs let you cover the fore and aft ends of a cabin, or protect a boat and a house at the same time.

Why one pack is not enough on a boat

Unlike a room in a house, a boat cabin is exposed to moisture on every surface. The section below the waterline stays permanently cool, and the swing between day and night temperatures increases condensation. A single pack placed at one end cannot protect a locker at the other. The twin set lets you treat both zones separately.

Key features

• 2 x 125 g set: two cabin zones, or a boat and a home.
• Anchor print design: fits nautical interiors.
• CaCl₂ gel technology: no liquid escapes even in a swell.
• Leak-proof pouch: safe against cushions and timber surfaces.
• Independent use: the packs can be opened at different times.
• Up to 60 days: shorter in coastal humidity.

Specifications

Placing them in a cabin

1. Unwrap both packs.
2. Put one in the forward locker.
3. Put the other in the aft seating or berth area.
4. Use the hooks to secure them to grab handles.
5. Replace each pack as it saturates.

Frequently asked questions

Does salt air reduce performance?
Absorbing capacity is unchanged, but the higher coastal humidity fills the pack faster.

Is it enough over winter lay-up?
For boats closed up for months, increase the number of packs or choose the 500 g version.

Will it damage timber surfaces?
No. The moisture becomes gel and the pouch is leak-proof, so contact with timber is not a problem.