Moisture Absorber Pack Sakura 2x125 g
Sakura Moisture Absorber Pack 2x125 g – Twin Set for Two Cupboards
The twin Sakura moisture absorber set protects two enclosed spaces at once. It suits a bedroom wardrobe plus a hallway cupboard, or the two ends of a single wide wardrobe, spreading 250 g of capacity across two points instead of concentrating it in one corner.
Why two packs work better than one
Humidity is not evenly distributed inside a cupboard. The side against an exterior wall and the lower shelves are consistently damper than the rest. A single pack dries the air immediately around it, but its effect two metres away is limited. A twin set lets you place packs at both ends of the volume, so protection is far more even.
Key features
- 2 x 125 g set: for two cupboards or both ends of a wide one.
- Matching cherry blossom design: both packs share the same print.
- CaCl₂ gel technology: moisture is held as gel, never as liquid.
- Use them separately: the packs work independently.
- 250 g total capacity: twice the absorbing surface of a single pack.
- Up to 60 days: applies to each pack individually.
Specifications
| Product | Sakura Moisture Absorber Pack, Twin Set |
|---|---|
| Quantity | 2 units x 125 g (250 g total) |
| Active ingredient | Calcium chloride (CaCl₂) based compound |
| Duration | Up to 60 days per pack |
| Recommended for | Wardrobes, hallway cupboards, pantries, wide shelving |
| Packaging | Two leak-proof pouches with hanging hooks |
Positioning the twin set
- Unwrap both packs.
- Place one on the side of the wardrobe facing the exterior wall.
- Place the second at the opposite end, or in a second cupboard.
- Both can be hung from clothes rails using their hooks.
- Replace each pack individually as it saturates.
Frequently asked questions
Does it make sense to put both in one wardrobe?
In wide, double-door wardrobes, yes. Placing them at opposite ends evens out the protection.
What if one pack fills faster?
That is normal — the one nearer an exterior wall saturates sooner. Simply replace that one.
Would a single pack have been enough?
For a small drawer or single-section cupboard, yes. For two separate spaces the set is better value.
Product Filters | ||
|---|---|---|
| Supplier Product Code | : | 125001 |
| Brand | : | Absormix |
| : | Moisture Absorber Packs | |































